How To Make Inexpensive Elegant Patriotic Votives

How To Make Inexpensive Elegant Patriotic Votives

Isn’t this inexpensive patriotic votive adorable?  The glitter gives it elegance, too.   Imagine several of these in a tablescape or in a patriotic table display!

How To Make Beautiful Beach-Themed Glitter Jar Votives
DIY Beach-inspired Glitter Votive

(We are an Amazon affiliate and may receive a small percentage of any sales through the links on this page at no cost to you.  Thanks for supporting this website!)

As I made the beach-themed votive, the idea for this patriotic votive was born.  On a shopping trip to Michael’s, I picked up a package of star brads.

How To Make Inexpensive Elegant Patriotic Votives
Supplies needed for Oui jar votives.

Supplies Needed

  • Clean empty Oui Yogurt Jar
  • Clear Gloss Mod Podge
  • Red fine glitter
  • Paintbrush
  • Washi tape
  • Krylon Glitter Sealer
  • Glue gun
  • Scissors
  • Patriotic ribbon
  • Star brad paper fastener
  • Button

Votives Directions

How To Make Beautiful Beach-Themed Glitter Jar Votives
Apply Washi Tape Just Under the Jar Rim.

First, wrap some Washi tape just under the rim of the jar. The yogurt jar is smaller at the top and gradually larger as it stretches to the bottom.  The tape along the top edge might need pleating a little in places.  That is not a problem, but you don’t want pleats on the bottom edge.  To make it easy to remove the tape, fold the end back on itself.

Paint the clear gloss Mod Podge, starting in the middle of the Washi tape, brushing away from the tape.  This will lessen the chance of glue seeping under the tape.

How To Make Inexpensive Elegant Patriotic Votives
Sprinkle glitter over the wet Mod Podge.

Once the side of the jar is covered in Mod Podge, put your fingers inside the opening and turning the jar on your fingers, sprinkle fine glitter liberally over the glue.   Make sure all of the wet Mod Podge is covered with glitter.  If you are doing multiple jars, repeat for each of the jars.  Remove the Washi tape and allow the jars to dry overnight.

How To Make Inexpensive Elegant Patriotic Votives
Allow the Mod Podge to dry.

 

(We are an Amazon affiliate and may receive a small percentage of any sales through the links on this page at no cost to you.  Thanks for supporting this website!)

Notice that I had a very small tube of the red glitter.  While it was enough to cover the jar, the tube emptied quickly as it was sprinkled over the glue.  I had to keep pinching glitter off the paper and sprinkling it on the glue.  This glitter just happened to be in my stash.  I would definitely suggest getting a larger bottle!

Seal With Glitter Sealer

At this point, use Krylon Glitter Sealer to seal the glitter if you like and allow this to dry for 12 hours or overnight.

Adding The Ribbon and Star Brad Paper Fastener

Decorative items for patriotic votive
Decorative items for patriotic votive

It just so happened that I had a small piece of red, white, and blue ribbon.  I bought the star brad paper fasteners for another patriotic project I’m planning.  Looking at the brads next to the ribbon, the realization that the star is just not big enough for the ribbon, set in.

Brainstorming, the idea of adding a button came to mind.  Initially, I thought about cutting off the feet of the brad, but with a button, the feet can just be inserted into a hole and bent to secure.

Gluing the Ribbon

First, cut a piece of ribbon allowing excess to cut after securing the ribbon to the jar.  Fold the ribbon in half, dab a dot of glue either on the jar or on the ribbon at the halfway mark. Place the ribbon on the jar.

How To Make Inexpensive Elegant Patriotic Votives
3 steps to glue the ribbon to the jar.

Remember that these yogurt jars are slightly smaller at the top.  When the ribbon is wrapped, it will have to be tilted slightly downward.  Dab another dot of glue on the opposite side of the jar and gently pull the ribbon to the front and onto the glue.

Place another dot of glue in the middle of the previously glued ribbon and gently pull the other ribbon end over the first at an angle.  

Trim the ends of the ribbon at an angle.
Trim the ribbon ends at an angle.

Trim the ribbon ends at an angle.

Applying The Button and Star Brad

First, insert the brad feet into one of the holes in the button.  By turning the star brad slightly, it covers all the holes.   Open the feet and secure the brad to the button.

Secure the button and the brad to the votive.
Secure the button and brad to the votive.

Apply hot glue to the back of the button and place it in the middle of the ribbons where they overlap.

 

Add a tea light or small votive candle.  Isn’t this gorgeous?  Imagine several of these shimmering candles as part of a tablescape. 

Be Social!

Yes, come join 44 k + followers on our Pinterest Boards, where we pin our favorite creative ideas and share ours!

Follow me on Instagram, PinterestBloglovin’, and Facebook so you won’t miss anything!  I would love for you to share this post with your friends!  They need amazing ideas, too!  Pin it!  It only takes a second!  #ouiyogurtjars #yogurtjars #patrioticdecor #patrioticdiy #patrioticvotives

 

MiloTree

MiloTree

 

6 comments / Add your comment below

  1. Love it! I see now where you can buy various lids for those jars on Amz. Thanks so much for linking up at A Themed Linkup 115 for All Things American and Patriotic. Pinned.

    1. Thanks, Dee! A few years ago, you could only buy the lids from the company. These little jars come in so handy, I’ve bought a few packs of the lids. It’s good to know you can find them on Amazon!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Verified by MonsterInsights